The antennas are characterized by a number of parameters. Radiation pattern is a graphic representation of radiation characteristics of an antenna according to direction (azimuth and elevation coordinates). Most often represent the radiated power density, but also can find diagrams or phase bias (military antennas). Considering the radiative pattern, we can make a general classification of types of antenna and we can define the directivity of a receiver (isotropic antenna, directional, bi-directional, omni).
Most radio aerials today is primarily designed to be able to send or receive radio waves in a narrow frequency band, for example. FM via VHF band II (87.5-108 MHz). Masts propagate / receives radio waves through coupling with the alternating magnetic field. These types of antenna are used for long-wave, medium-wave and short-wave up to about 6MHz. It is possible to realize antennas that operate according to this principle, up to 60 MHz.
A typical loop antenna is made of copper, in resonance with a variable capacitor when transmitting and can withstand high voltages. The transmission can take many amps and the voltage across the capacitor several kilovolts. Loops of copper are more effective than lower managers, due to the large flow. Loops are circular and more efficient than squares, an alternative is octagoner that are easier to manufacture.
Bandwidth is a frequency range in which the antenna parameters meet certain characteristics. Can define impedance bandwidth, polarization, gain or other parameters. Directivity is the impedance of masts at its terminals. It is the relationship between the voltage and the input current. Z = frac V I. The impedance is a complex number. The real part of an impedance is called mast resistance and the imaginary part is reactance.
If the antenna is replaced by the radiation resistance, this would do their job, ie, would produce the same amount of power that the antenna would radiate. The radiation resistance is equal to the ratio of the power radiated by the aerial divided by the square of the current in its feed point. One could obtain an mast efficiency, given that is the ratio of the radiated power and the dissipated power.
The antenna location should have unrestricted access to just above the the sky. Earth would reflect more or less of radio waves. This depends on: mast placed as high as possible so that there are no obstructions between the transmitter and receiver. Satellite or interstellar radio propagation (Earth to satellite, space shuttle) or (satellite, space shuttle to Earth). There must be no obstructions between the satellite and ground transmitters.
The polarization can be linear, circular and elliptical. Linear polarization can take different orientations (horizontal, vertical, +45, -45). The circular or elliptical polarizations can be right or left (right-handed or left-handed), according to the direction of rotation of the field (observed away from the antenna). Transmitters within decoupling coefficient defined polarization. This measures the amount of power that is capable of receiving a polarized antenna of a form having an effective.
The characteristics of an antenna depends on the relationship between the dimensions and the wavelength of a signal transmitted or received radio frequency. If the masts dimensions are much smaller than the wavelength are called elementary antennas, whether they have dimensions of order of a half wavelength resonating and if its size is much larger than the wavelength are directives.
Most radio aerials today is primarily designed to be able to send or receive radio waves in a narrow frequency band, for example. FM via VHF band II (87.5-108 MHz). Masts propagate / receives radio waves through coupling with the alternating magnetic field. These types of antenna are used for long-wave, medium-wave and short-wave up to about 6MHz. It is possible to realize antennas that operate according to this principle, up to 60 MHz.
A typical loop antenna is made of copper, in resonance with a variable capacitor when transmitting and can withstand high voltages. The transmission can take many amps and the voltage across the capacitor several kilovolts. Loops of copper are more effective than lower managers, due to the large flow. Loops are circular and more efficient than squares, an alternative is octagoner that are easier to manufacture.
Bandwidth is a frequency range in which the antenna parameters meet certain characteristics. Can define impedance bandwidth, polarization, gain or other parameters. Directivity is the impedance of masts at its terminals. It is the relationship between the voltage and the input current. Z = frac V I. The impedance is a complex number. The real part of an impedance is called mast resistance and the imaginary part is reactance.
If the antenna is replaced by the radiation resistance, this would do their job, ie, would produce the same amount of power that the antenna would radiate. The radiation resistance is equal to the ratio of the power radiated by the aerial divided by the square of the current in its feed point. One could obtain an mast efficiency, given that is the ratio of the radiated power and the dissipated power.
The antenna location should have unrestricted access to just above the the sky. Earth would reflect more or less of radio waves. This depends on: mast placed as high as possible so that there are no obstructions between the transmitter and receiver. Satellite or interstellar radio propagation (Earth to satellite, space shuttle) or (satellite, space shuttle to Earth). There must be no obstructions between the satellite and ground transmitters.
The polarization can be linear, circular and elliptical. Linear polarization can take different orientations (horizontal, vertical, +45, -45). The circular or elliptical polarizations can be right or left (right-handed or left-handed), according to the direction of rotation of the field (observed away from the antenna). Transmitters within decoupling coefficient defined polarization. This measures the amount of power that is capable of receiving a polarized antenna of a form having an effective.
The characteristics of an antenna depends on the relationship between the dimensions and the wavelength of a signal transmitted or received radio frequency. If the masts dimensions are much smaller than the wavelength are called elementary antennas, whether they have dimensions of order of a half wavelength resonating and if its size is much larger than the wavelength are directives.
About the Author:
You can visit www.hascall-denke.com for more helpful information about Form Of And Function Of Military Antennas.
Aucun commentaire:
Enregistrer un commentaire